Access door for buildings in potable water supply where chlorine gas is stored or used
Chlorine room door, pre-assembled and ready for installation, single door, double-skinned, constructed entirely from 1.4404 (AISI 316 L) stainless steel featuring a double rubber seal. The door and frame close flush, and the door opens outward (in direction of escape), compliant with OSHA standards.
Door with a 1 mm skin, 2 in. / 55 mm thickness, featuring injected CFCs-free polyurethane hard foam insulation, a longitudinally ground surface finish, door inside lacquered in RAL 9006 (stainless steel look), with rubber seal. Fastened to the frame with stable maintenance-free hinge plates. Two aeration slits, W x H = 100 x 20 mm (one in top door section, one in bottom door section), with plastic insect screen.
Galvanized mortise dead lock with stainless steel forend provided for a customer-supplied profile double cylinder, with anti-panic function. Stainless steel door handle set, button outside, handle inside.
Frame, three-sided, fabricated from special section, with inserted rubber seal, with step flashing, including fixing material.
Frame and door shielded arc-welded and acid bath cleaned before washing, drying and surface passivation.
Options
Frame:
- Z-frame
- Block frame
Mounting:
- Embedded
- Bolted with dowelling clips
- Bolted through the frame not to affect the finished wall
Door opening options:
- Hinges on left
- Hinges on right
Other Options:
- Upper door closer, lockable in position
- One-part or two-part door arrestor
- Surface finish (lacquer with or without anti-graffiti properties, wooden paneling)
- Electronic monitoring options (alarm system in door surface, magnetic contact, lock-bolt contact)
- Door heating (heating cable in frame and/or door surface), without temperature sensor, without controls
- Potential equalization on frame
- Security ventilation louvres, openings to admit light
- Steel sheet finish for exterior door surface for installations exposed to sunlight
Downloads
