Safety climbing device with integrated safety guard rail SiS3
Safety climbing device, with design certification and CE marking, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel.
In accordance with UVV regulations ladders with 3 m or 5 m a height of all must be equipped with devices that protect personnel against falls from a height, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel.
The handle in the middle is made as a safety guard rail, with bottom and top trip gear, which can only be undone by hand, U-profile climbing rungs with perforated surface, 30 mm, slip resistance R 13 and lateral slipping limits, step height 280 mm, with fixing brackets for wall fixing (max. distance 840 mm), with coupling for insertable entrance aid. Completely shielded arc welded, acid-treated in a pickling bath and passivated.
The following entrance aid with guard rail options are available (see following pages):
- Insertable entrance aid, pivoted, type EH FSS D
- Insertable entrance aid, type EH FSS
- Insertable entrance aid, type EH FSS ‘Köln’
Options
- 1.4404 (AISI 316 L) stainless steel
- Fall arrestor type S5c with self-unfolding safety belt type HSE-BFD and spring safety hooks certified by “TÜV SÜD PRODUCT SERVICE GmbH“, CE 0123, suitable for safety guard rail
- Safety belt in accordance with EN 361, form A (breast-shoulder-crotch belt), suitable for safety guard rail
- Stainless steel fixing material: stud anchors
- Rest platform, foldable
- Entrance aid in accordance with DIN 19572
- Access ladders must have a handhold at their exit. This requirement is deemed to be fulfilled if one or both handles of a ladder project at least 1.1 m beyond the exit height.
- This projection must be taken into account when selecting the ladder length!
- Refer also to our data / dimension sheet for the entrance aid.
Downloads
